Who selects the factory?
You do, after reading the aligned replies. The desk can show where a license, an optic, or a freight line was omitted. It does not award the order.
DESK SCOPE
LinkScope Sourcing 15
LinkScope Sourcing 15 coordinates factory questions for buyers who need an ethernet switch 32 port comparison, or a narrower port plan in the same family. The work is specification capture, supplier outreach, and a side-by-side reading of the replies.
LinkScope Sourcing 15 works as an independent sourcing partner. It is not a switch manufacturer, it does not claim authorized distributor status, and it does not operate a network. A quotation that arrives here is the factory's document. Publishing it as a site fact would mix those roles.
What the desk writes down, and what it leaves open
- Port plan
- Copper count, speed per port, and uplink cages. A 32-port face, a 16-port PoE face, a 12-port PoE face, an 8-port Fast Ethernet face, and a 2-port SFP face are different briefs. They are not sizes of one stocked chassis.
- Power
- AC or DC input for the switch, plus any PoE class and total watt budget. The desk records the buyer's request. The supplier's datasheet has to match it before the number is comparable.
- Commercial basis
- Quantity, currency, per-switch or whole-order budget if you choose to share one, Incoterms, freight, and the US destination. A preference for high-end, mid-range, budget, or undecided suppliers is stored as a preference.
- Evidence
- Current datasheet, forwarding-rate test basis, applicable FCC or NRTL references, and warranty wording, each tied to the model in the reply. ISO 9001, when a supplier offers it, is a quality-system file for that supplier, not a performance result for the switch.
Boundaries a buyer can check
Reference values stay questions, not measurements this desk has run. Ask whether switching capacity is printed in Gb/s, whether the forwarding rate uses 64-byte frames and is printed in Mpps, and whether Power over Ethernet is requested as 802.3af at 15.4 W or 802.3at at 30 W at the port. When an SFP is in the packet, ask for transmit power, receiver sensitivity, and optical budget at 1310 nm or at 850 nm. Insertion loss of the patch and return loss of the connector sit on that optic line. A 1U rack unit face still needs depth in millimeters, and a desktop shell is a different mechanical row from a rack unit.
Who proves compatibility?
The supplier that names the model, against the host and fiber plant you described. An IEEE 802 overview is a public question source. It was checked on 2026-10-27. It does not test your pair of devices.
Who states the lead time?
The factory, against the configuration in the brief. A date on this website would be a guess. Incoming inspection, serial checks, and license activation stay in your acceptance plan.
Start from the port plan you actually need
Use the form to send ports, speed, power, quantity, destination, and timing. Optional budget fields stay out of the stored field names and are appended to the requirement text when the browser submits.
If the brief is still a sketch, the Quick Spec Brief page lists the open rows. The port cards are labels for the same family.